Autoborne Sealers – The Ultimate Sealer-Primer for Painting Hard-Surfaces

Description

Introducing Autoborne Sealers – The Ultimate Sealer-Primer for Painting Hard-Surfaces

Are you tired of dealing with uneven finishes and poor adhesion on your hard-surfaces? Look no further than Autoborne Sealers, the ultimate sealer-primer for painting hard-surfaces. This high-quality product is compatible with all Createx paints and is designed to provide a smooth, level finish with excellent adhesion. Whether you’re working with aluminum, plastic, fiberglass, wood, or any other substrate, Autoborne Sealers is the perfect choice.

Benefits of Autoborne Sealers

Autoborne Sealers offers a range of benefits that make it the go-to choice for professionals and DIYers alike. Not only does it dry fast and level, but it also sands well, shaving into fine particulates when dry sanded with 600 – 1000 grit sandpaper. This means you can achieve a smooth finish without the need for extensive sanding. Additionally, Autoborne Sealers can be lightly dry sanded to remove any texture before applying paint, ensuring a flawless finish.

Application and Preparation

Applying Autoborne Sealer is a breeze. Simply scuff the substrate or primer with 400 – 800 grit sandpaper, clean with a solvent or water-based degreaser, and apply the sealer. Allow the sealer to dry matte before recoating or applying Createx paint. For best results, follow the recommended application guidelines and mixing ratios to ensure a smooth, even finish.

Coverage and Drying Times

Autoborne Sealer covers opaque in 2 – 3 coats, with an average coverage of 400 square feet per gallon. Drying times are estimated at 20 – 30 minutes, depending on temperature and humidity. Allow the sealer to dry completely before applying Createx paint for a flawless finish.

Health and Safety

As with any painting product, it’s essential to follow proper health and safety guidelines when using Autoborne Sealers. Use in a well-ventilated area, avoid contact with eyes, and wash hands thoroughly with soap and warm water after use. When spraying or sanding, use a properly fitted respirator per the manufacturer’s instructions.